Search Results

Click column header to sort

Search Results Page 32 of 57

Wood Applied Intelligence (AI) is seeking expression of interest for a Senior Instrumentation Engineer to support our UK projects.   Whilst this role can be based anywhere in the UK, mobility and travel to customer sites and face to face meetings with colleagues will be expected as required. This position can be either staff or contract.   In this role you will be responsible for the execution of project work, in accordance with the Discipline Design Instructions, including Wood and / or Project Procedures on Safety and Quality Control, within the man-hour, cost budgets and the project schedule targets.   Responsibilities/Duties:   The ideal candidate will be highly motivated, able to work independently, and have demonstrable leadership qualities.  You will be confident in your own ability to deliver the Control and Instrumentation scope on a project on time and within budget, while facilitating effective work share with other execution centres around the world. - Prepare RFQ packages for the Instrumentation packages to the required Client, Wood and Project procedures and standards - Review Vendors quotations, prepare technical bid evaluations and recommend the final technically acceptable Vendor.  Technically approve Order Variation Summaries - Hold co-ordination meetings and engineering review meetings with Vendors of major equipment as required - Liaise with other Disciplines and Client as necessary - Assess progress and procedure associated reports and input to the Delivery Management System.  Derive and suggest plans to recover slippage, correct inefficiency and to take any resulting agreed actions - Advise the Lead Instrument Engineer of any major slippages and their causes, all policy matters, major technical problems and unresolved differences with other Disciplines, and requests for changes by the Client which may constitute a contract change - Control and support management of discipline hours - Prepare, check, approve and provide technical input into project deliverables to the required quality standards in conformance with or better than, the approved budget and programme - To provide relevant knowledgeable practical skills in the response and actions for:- - Site visits and site surveys - Site queries, discussions and optioneering - Supplier, vendor, contractor, client, and site related discussions - Site based activities
Requisition ID
2022-103636
Multi-Locations
No
Country
United Kingdom
State/Province
Surrey
City
Woking
Vacancy Type
Agency / Contract
Wood is accepting applications for Chemical Engineering Summer Student placements working within the Process Engineering Department in Reading starting in July 2022.   Wood is a global engineering, procurement and construction contractor. We deliver solutions for clients in the upstream oil & gas, midstream & LNG, refining, petrochemicals & chemicals, pharmaceuticals & biotechnology, and energy transition industries. With over a century of industry experience, we have developed a global perspective and an unrivalled reputation and are well-placed to help our clients navigate to a sustainable future.   Our reputation for safely delivering quality projects on time and on budget is well recognised in the industries we serve. We have proven expertise in managing large, complex projects, a global reach and long-standing international presence, strong relationships with our clients and cutting-edge processes and technologies.   What that means to you is the opportunity to experience real variety, work with different cultures and you'll work closely with our clients and be part of a global team, committed to achieving outstanding results in a stimulating and quality-driven environment.   We have been very successful in winning major new projects around the world in our well-established business sectors.  In addition to projects in our traditional sectors, there may be opportunities for exposure to:   - Carbon Capture: Industrial clusters, concept development to detailed engineering. - Hydrogen: blue hydrogen (w/CCS), green hydrogen, ammonia/hydrogen economy innovation. - Future of hydrocarbons: adapting existing facilities and designing ambitious new projects, to produce the next generation of lower carbon fuels and chemicals. As a Summer Student you will be involved in undertaking process design activities on Wood’s current projects.  You will typically be required to: - Work within the various Process Engineering design teams on Wood's current projects. - Undertake process design calculations for, hydraulics, equipment sizing and safety related devices, preparing Process Flow Diagrams, Equipment Specifications and other process documents. - Assist in the production of Piping & Instrumentation Diagrams and other process drawings as required. - Assist the Lead Process Engineers in undertaking other non-technical tasks as directed, including tracking of comments on issued documents, updating progress measurement and schedule programs, recording actions in project review and HAZOP meetings. Please note applications will be for a July 2022 start and are expected to be for approximately 3 months, though this will be dependent on the exact project requirements and your university commitments.
Requisition ID
2022-103710
Multi-Locations
No
Country
United Kingdom
State/Province
Berkshire
City
Reading
Vacancy Type
Fixed Term
Wood is looking to recruit Process Assistants to work on a 9 month fixed term contract (FTC) basis.  At the end of the term there's potentially the opportunity to move into a permanent position.  We're looking for people to join us quickly so you must be available to start within the next 1-2 months.   About Wood:   Building on our worldwide reputation for technical excellence, we’re united by our passion for creating a sustainable future. In addition to the conventional sectors, you can expect to become involved in:   - Carbon Capture: Industrial clusters, concept development to detailed engineering. - Hydrogen: blue hydrogen (w/CCS), green hydrogen, ammonia/hydrogen economy innovation. - Future of hydrocarbons: adapting existing facilities and designing ambitious new projects, to produce the next generation of lower carbon fuels and chemicals. Our reputation for safely delivering quality projects on time and on budget is well recognised in the industries we serve. We have proven expertise in managing large, complex projects, a global reach and long standing international presence.   What that means to you is the opportunity to experience varied projects, work with different cultures and work closely with our clients as part of a global team.   We have been very successful in winning major new projects around the world in our well established business sectors.   As a Process Assistant your responsibilities will involve: - Working within the various Process Engineering design teams on Wood’s current projects, - Undertaking process design calculations, preparing Process Flow Diagrams, Equipment Specifications, and other process documents. - Assisting in the production of Piping & Instrumentation Diagrams and other process drawings as required. - Assisting the Lead Process Engineers in undertaking other non - technical tasks as directed, including tracking of comments on issued documents, updating progress measurement and schedule programs.
Requisition ID
2022-103720
Multi-Locations
No
Country
United Kingdom
State/Province
Berkshire
City
Reading
Vacancy Type
Fixed Term
Wood is recruiting a Piping - TPE V/ Piping Material Specialist to further increase the capacity and knowledge base of the well - established Piping Engineering department This will give you the opportunity to work on a wide range of Wood projects - Assists in establishing project aims and outcomes to contribute to the development of a comprehensive project design. - Evaluates current procedures and recommends changes to improve the efficiency of planning and scheduling projects - Makes recommendations on project organization requirements, work methods and procedures and technical innovations by devising practical and economical solutions to problems in own or various engineering disciplines. - Supervises and participates in delivery of complex engineering tasks. - Formulates and directs investigations or prototype, model and system studies, evaluating and interpreting the data obtained and recommending practical application of results. - Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard materials, and complex coordination requirements. - Coordinates implementation of design engineering solutions. - Reviews project-related documentation to ensure accuracy. - Supervises complex engineering tasks related to a portion of a major project - Work consists of complex procedures and tasks where diagnostic ability is required to assess the situation and identify appropriate actions to follow - Assignments cover broad and complex subject matter where issues and factors may by characterized by unusual demands and require additional evaluation to establish the nature and scope of the problem - Exercises mature business judgement in devising practical, economical solutions - Participate in incident investigations as required - Assesses work against standards, aims and specifications. - Adhere to and comply with relevant discipline specific procedures and provide feedback for continuous improvement. - Management of key stakeholders in the execution and delivery of contracted activities - Organising, active participation and occasional leading of design review
Requisition ID
2022-102981
Multi-Locations
No
Country
Saudi Arabia
City
Al-Khobar
Vacancy Type
Staff / Permanent
Wood is currently seeking an Engineering Manager in order to grow its Brisbane Mining & Mineral group to meet the large demand in critical metals projects.   Wood is at the forefront of engineering solutions for a net zero future. A key component of decarbonising the world is the Mining and Minerals Industry which supplies the critical minerals required for this revolution. Wood is currently delivering critical metals projects (Battery and Magnet metals) all over the world, including Copper, Lithium, Vanadium, Rare Earths, and Base Metals projects.   We can offer you a career in the ever-expanding battery and magnet metals industry driving the decarbonisation of the globe. Responsible for the execution of the engineering portion of a multi-discipline engineering scope of work on one or more projects / work scopes. Has responsibility for coordinating and completing the various engineering, and start-up aspects of a project(s) while meeting HSSE, quality, schedule, and budget performance goals. Has responsibility for the technical excellence of the engineering portion of a project(s) across all disciplines.    As part of this highly visible role, key accountabilities include (but will not be limited to): - Driving technical assurance on the assigned scope(s) of work - Managing and leading, supporting and supervising the discipline engineering teams on the assigned scope(s) of work. - Management of key stakeholders in the execution and delivery of contracted activities. - Developing and retaining motivated and competent people. - Undertaking the role of process owner. - Driving safety by design - Driving and leading on opportunities for innovation - May participate directly in the design, development and inspection of technical projects or in the engineering work of the department. - Leads by example, consistently displaying and enforcing the Company’s values and behaviours, and commitment to the highest standards of safe and ethical behaviour, to ensure safe and reliable operations and client satisfaction  
Requisition ID
2022-102562
Multi-Locations
No
Country
Australia
State/Province
QL
City
Brisbane
Vacancy Type
Staff / Permanent
Wood is currently seeking a Senior Piping Designer in order to grow its Brisbane Mining & Mineral group to meet the large demand in critical metals projects.   We can offer you a career in the ever-expanding battery and magnet metals industry driving the decarbonisation of the globe. This full time permanent role will be based in our modern office in the city centre and will be a key pillar for our expanding team.    Wood is at the forefront of engineering solutions for a net zero future. A key component of decarbonising the world is the Mining and Minerals Industry which supplies the critical minerals required for this revolution. Wood is currently delivering critical metals projects (Battery and Magnet metals) all over the world, including Copper, Lithium, Vanadium, Rare Earths, and Base Metals projects.   In this role, you will be responsible for duties such as: - Develop piping and pipe support standard detail drawings - Assist in the preparation and development of project specific procedures - Provide input into the P&IDs and participate in HAZOP reviews - Provide technical support to the onsite construction teams, projects department and estimating department - Ensure the quality of deliverables in line with the relevant codes and standards, needs of the customer and regulatory authorities
Requisition ID
2022-103674
Multi-Locations
No
Country
Australia
State/Province
QL
City
Brisbane
Vacancy Type
Staff / Permanent
Wood is currently recruiting for Principal Technical Safety Engineer to join our team in Melbourne. Reporting to the Lead Process and Safety Engineer, the successful applicant will be part of a busy project team delivering projects for our client.   Responsibilities - Ability to perform QRA for new and existing offshore and onshore Oil & Gas facilities - Performing Consequence Modelling using PHAST software - FSA Studies development including FERA, NFHA, EERA, ESSA, TRIA, DORA - Onshore and Offshore Safety Case development - Providing technical input on industry best practices in relation to ALARP requirements, loss prevention codes and standards - Ability to engage in various risk Workshops/ Reviews e.g. HAZID, HAZOP, Constructability Reviews and incorporate Review findings into design requirements and Safety Case. HAZOP facilitation experience would be highly regarded
Requisition ID
2022-103655
Multi-Locations
No
Country
Australia
State/Province
VI
City
Melbourne
Vacancy Type
Agency / Contract
Wood is currently recruiting for a contractor to provide Principal Technical Safety (Process Safety) Engineering services for a 6 months contract to our Operations business in Darlington, UK.   The Operations business delivers services to brownfield and greenfield projects across multiple sectors including Oil & Gas, refining, petrochemicals, bulk and fine chemicals and pharma along with emerging technologies such as Hydrogen and Carbon Capture. Our Technical Safety team also provides specialist support to other parts of the business including consultancy services and provision of independent safety review co-ordinators and facilitators.   Workscope   Providing Technical Safety support to multidisciplinary engineers and designers to ensure effective implementation of safety and environmental regulatory requirements whilst observing risk management processes. This includes providing support under the CDM regulations in the UK.   Scope of services to be provided - Lead and deliver Technical Safety project activities and deliverables within quality, budget and schedule constraints - Support to projects on regulatory requirements including COMAH, DSEAR, PSR, PUWER,  and CDM - Lead formal process safety assessments such as HAZID, HAZOP, SIL target setting, and other safety workshops - Carry out qualitative and quantitative risk assessments, including Fire and Explosion Risk Assessments (FERA) - Develop safety engineering philosophies, design HSE plans, safety specifications, equipment specifications and monitor project/contractor/vendor compliance to these - Produce and review specifications, data sheets, schedules, study reports, and design calculations; ensuring that they conform to engineering quality, competence, and project management systems - Provide sound technical advice and solutions to a diversity of technical problems within the discipline - Co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up - Attend client meetings and communicate issues with other engineers as required - Interact with team members in a positive and professional manner at all times - Adhere to, and comply with, relevant discipline specific procedures and provide feedback for continuous improvement - Participate in audits and incident investigations as required - Ensure self-awareness of relevant regulatory framework, legislation changes, initiatives and industry technology developments - Thorough knowledge and understanding of the fundamentals of process safety and environmental engineering methodologies, software systems, and design practices as they relate to FEED, Detail Design, Construction, Commissioning, and plant Start-up - Provision of guidance and support on appropriate safety and environmental engineering - Awareness of international codes and standards
Requisition ID
2022-103612
Multi-Locations
No
Country
United Kingdom
State/Province
Durham
City
Darlington
Vacancy Type
Agency / Contract
Wood is currently recruiting for a Study Manager with extensive experience in the Oil & Gas, Petrochemical or similar sector of the industry to provide support to our Client in the execution of projects  Job Objective: - Responsible for Project Management pf Pre-Feasibility and Feasibility Studies - Assist in proposal preparation for multi-disciplinary teams - Responsible for schedule and cost control on studies - Main interface with client on a technical and project management basis - Responsible for quality of study deliverables - Ability to work under pressure and achieve tight deadlines - Promote multi-disciplinary teamwork. - To actively pursue excellent Health, Safety and Environmental performance standards and to encourage all staff to achieve or out-perform the indicated HSE KPI’s. Key Accountabilities & Responsibilities: - Manage the assigned study team to ensure that studies are completed to the required technical standard. - Manage the assigned study team to ensure that the study is completed on time and within budget. - Undertake site visits to the project location and areas for project sourcing. - Identify local and foreign suppliers and vendors. - Identify applicable local laws and rules. - Co-ordinates the generation of specifications for enquiries to support the cost estimate. - Co-ordinates the compilation of bills of quantities and the issue of tender documents to prospective suppliers. - Responsible for study report deliverable structure and content. - Liaison and communication with the client, as required. - Appoint consultants in areas where specific expertise is required. - Responsible for design safety in the study. - Co-ordinate’s compilation of management cost estimate review and presentation to the client. - Assist in business development activities, as required. - In periods of low work fall back to a Project Engineer and/or Process Engineering position.
Requisition ID
2022-103675
Multi-Locations
No
Country
South Africa
City
Midrand
Vacancy Type
Agency / Contract
Wood is recruiting for a Document Controller to work in our Darlington office on a permanent basis.    Responsibilities: - Understanding the purpose of document management and the benefits to the business - Understanding the roles and responsibilities of document control / technical administration within the technical environment - Understanding where document management aligns with the engineering work process - Design Data Management – can demonstrate practical management of design deliverables in accordance with corporate procedures - Supplier Data – can demonstrate practical management of supplier data in accordance with corporate procedures - Operations Data Management – can demonstrate practical management of Operations / Duty Holder data in accordance with corporate procedures - Technical Documents – can demonstrate knowledge of different types of documents and drawings and is able to visually identify key documents - Review/Comment – can demonstrate knowledge of the comment and approval process for documents.             - Document Numbering – can demonstrate understanding of corporate numbering system, how document numbers are applied and how client requirements are implemented - Information Lifecycle – can demonstrate knowledge of typical information compilation / lifecycle               - Master Document Register - can demonstrate knowledge of MDR lifecycle - Distribution Matrix - can demonstrate knowledge of distribution matrix lifecycle - CMS Content Management System – can demonstrate correct use and maintenance of meta data attributes within the CMS - CMS Security – can demonstrate correct application of access rights to CMS for users - CMS Search – can demonstrate the use of search function within the system to locate information and to set up recurring searches - Client Information - can demonstrate management of client information in accordance with project / corporate procedures - User Training - knowledge and ability to carry out user training in the CMS - Transmittals / Workflow - can demonstrate understanding of transmittal / workflow lifecycle                      - Carry out Data Import/Export – can demonstrate how information is imported / exported from CMS and apply the correct protocols with regards to appropriate meta data                     - Transition – can demonstrate knowledge of key requirements for successful transition of information from / to WGPSN - Data Handover/Closeout – can demonstrate an understanding of the requirements to enable successful data handover to Client and project closeout - Audits - Ability to carry out discipline audits - Reprographics - can demonstrate examples of work which includes hard copy compilation, electronic bookmarks and OCR scanning - Record Retention - Can demonstrate the archiving lifecycle and detail the critical success factors involved in accurate record retention.         - Tenders - Ability to develop response to tender documentation
Requisition ID
2022-103600
Multi-Locations
No
Country
United Kingdom
State/Province
Durham
City
Darlington
Vacancy Type
Staff / Permanent
Wood is currently recruiting for Senior Pipeline Designer to strengthen our team in Dubai - Carry out assigned pipeline design work as part of a multi-discipline project team - To provide discipline specific design and drafting services that meet the Project and applicable statutory and regulatory requirements - Assume responsibility for the Pipeline design/drafting scope for the project - Develop cost effective pipeline design and drawings - To coordinate with other disciplines for interdisciplinary checks - Display a working knowledge of industry standard drafting practices, good mechanical aptitude and general knowledge of engineering - To prepare pipeline route studies, desktop studies based on survey inputs - To prepare Pipeline Overall Route Maps, Key Plans, Alignment Sheets, Station Approach drawings Alignment sheets, pipeline typical construction drawings, etc. in accordance with project specifications, international cods and standards - Preparation of Pipeline Detail / Bulk MTO - To carry out detailed high quality site visits, pipeline route surveys and associated data collection - Preparation of Piping input Drawings for On-plot / off-plot interface Areas at Process Plant - Coordination with Topographical Contractors and Site personnel for preparation of AFC Alignment sheets
Requisition ID
2022-103611
Multi-Locations
No
Country
United Arab Emirates
City
Dubai
Vacancy Type
Fixed Term
Wood is currently recruiting for a Senior Project Engineer to join our Operations team based in Perth. This is a long-term secondment opportunity reporting to the Delivery Manager, responsible for managing front end projects with a key client.   Wood delivers brownfields engineering, procurement, construction, optimisation and technical services to the oil and gas sector and enjoys long-term partnerships with some of the region’s most prominent producers, actively supporting operations in Western Australia, the Northern Territory, Kazakhstan, and Sakhalin.   Working in a key client ESC contract, you will be embedded in the client organisation while working to create delivery excellence across the assigned project portfolio, provide certainty and confidence to the client / project sponsor, and maintain robust control of project scope, schedule, cost and risk. In this highly visible role, you will be responsible for: - Specifying and coordinating the implementation and completion of moderate sized projects, a portfolio of small projects and / or major components of large projects - Safe delivery, ensuring quality, schedule and cost targets are met and managing associated risk mitigation - Delivery of project to agreed specifications, managing change and customer relationships and ensuring appropriate reporting and governance is adhered to and controlled At Wood you will join an inclusive and diverse global community of inquisitive minds and recognised industry innovators, partnering to create new possibilities.   Join us in the heart of Perth's CBD at Dexus Place - 240 St Georges Terrace, free 24/7 access to an exclusive onsite gym, superb end of trip facilities, coffee machines serving on demand and plenty of spaces to get creative.  In addition, you will have access to remote and flexible working options, purchased annual leave and employee discount programs.
Requisition ID
2022-103076
Multi-Locations
No
Country
Australia
State/Province
WA
City
Perth
Vacancy Type
Fixed Term
Wood currently has a requirement in our Design HSE team for a Senior Technical Safety Engineer to work on an agency contractor basis in our Staines office on a specific project for the next 12 months.   We are currently looking for professionals with the drive and commitment to make a genuine difference to ensure that Wood continues to differentiate itself from its competitors by delivering quality projects to our client’s requirements. Responsibilities include: - Use techniques, spreadsheets, databases and proprietary software as necessary to perform safety study assessments and generate project deliverable documents, including production, checking and approval as required - Preparation of design deliverables including philosophies, reports, studies, specifications, data sheets, drawings, etc whilst following all applicable operational procedures - Coordinating and liaison with other engineering disciplines as necessary in the preparation and development of the deliverables and ensuring that other disciplines’ input is incorporated - Ensure compliance with relevant specifications as well as applicable national/ international regulations, codes and standards - Responsible for the review and approval of vendor documentation as applicable to the discipline - Ensuring Purchasing and Estimating Departments have technical information for obtaining costs and availability of Technical Safety equipment and materials - Maintain effective interfaces between the Technical Safety project team and other disciplines’ teams, Client representatives and other third parties as required - Represent the Technical Safety discipline internally and externally on design issues they are involved in - Provide progress reporting and forecasting input to the Lead Technical Safety Engineer as required - Follow standard working procedures and ensure that compliance with relevant QA/QC systems is achieved
Requisition ID
2022-103647
Multi-Locations
No
Country
United Kingdom
State/Province
Surrey
City
Staines
Vacancy Type
Agency / Contract
Wood currently has a requirement in our Design HSE team for a Technical Safety Engineer to work on an agency contractor basis in our Staines office on a specific project for the next 12 months.   We are currently looking for professionals with the drive and commitment to make a genuine difference to ensure that Wood continues to differentiate itself from its competitors by delivering quality projects to our client’s requirements. Responsibilities include: - Use techniques, spreadsheets, databases and proprietary software as necessary to generate project deliverable documents, including production, checking and approval as required - Maintain effective interfaces between the Technical Safety project team and other disciplines’ teams, Client representatives and other third parties as required - Represent the Technical Safety discipline internally and externally on design issues they are involved in - Provide progress reporting and forecasting input to the Lead Engineer as required - Demonstrates judgement in determining the methods to apply to assigned tasks - Note-taking and active participation in design reviews - Review vendor documents under supervision and guidance - Follow standard working procedures and ensure that compliance with relevant QA/QC systems is achieved
Requisition ID
2022-103648
Multi-Locations
No
Country
United Kingdom
State/Province
Surrey
City
Staines
Vacancy Type
Agency / Contract
Wood currently has a requirement in our Design HSE team for a Senior Technical Safety Engineer to work on an agency contractor basis in our Staines office on a specific project for the next 6 months.   We are currently looking for professionals with the drive and commitment to make a genuine difference to ensure that Wood continues to differentiate itself from its competitors by delivering quality projects to our client’s requirements. Responsibilities include: - Use techniques, spreadsheets, databases and proprietary software as necessary to perform safety study assessments and generate project deliverable documents, including production, checking and approval as required - Preparation of design deliverables including philosophies, reports, studies, specifications, data sheets, drawings, etc whilst following all applicable operational procedures - Coordinating and liaison with other engineering disciplines as necessary in the preparation and development of the deliverables and ensuring that other disciplines’ input is incorporated - Ensure compliance with relevant specifications as well as applicable national/ international regulations, codes and standards - Responsible for the review and approval of vendor documentation as applicable to the discipline - Ensuring Purchasing and Estimating Departments have technical information for obtaining costs and availability of Technical Safety equipment and materials - Maintain effective interfaces between the Technical Safety project team and other disciplines’ teams, Client representatives and other third parties as required - Represent the Technical Safety discipline internally and externally on design issues they are involved in - Provide progress reporting and forecasting input to the Lead Technical Safety Engineer as required - Follow standard working procedures and ensure that compliance with relevant QA/QC systems is achieved
Requisition ID
2022-103646
Multi-Locations
No
Country
United Kingdom
State/Province
Surrey
City
Staines
Vacancy Type
Agency / Contract
Wood currently has a requirement in our Design HSE team for a Technical Safety Engineer to work on an agency contractor basis in our Staines office on a specific project for the next 6 months.   We are currently looking for professionals with the drive and commitment to make a genuine difference to ensure that Wood continues to differentiate itself from its competitors by delivering quality projects to our client’s requirements. Responsibilities include: - Use techniques, spreadsheets, databases and proprietary software as necessary to generate project deliverable documents, including production, checking and approval as required - Maintain effective interfaces between the Technical Safety project team and other disciplines’ teams, Client representatives and other third parties as required - Represent the Technical Safety discipline internally and externally on design issues they are involved in - Provide progress reporting and forecasting input to the Lead Engineer as required - Demonstrates judgement in determining the methods to apply to assigned tasks - Note-taking and active participation in design reviews - Review vendor documents under supervision and guidance - Follow standard working procedures and ensure that compliance with relevant QA/QC systems is achieved
Requisition ID
2022-103645
Multi-Locations
No
Country
United Kingdom
State/Province
Surrey
City
Staines
Vacancy Type
Agency / Contract
Wood is looking for an Engineer with a Bachelor or Master Degree in Electrical Engineering, who will be included in the Automation and Electrical team of the Life Sciences & Pharmaceuticals group.   Initial duties, supported by a Tutor, will be: - Understand Client’s technical requirements - Develop electrical system studies, specifications, calculations and datasheets - Develop the design documentation for the Building Automation & Low Current Systems (e.g. HVAC controls, Fire&Gas Systems, access controls, data networks and so on) - Support the technical and economical evaluation of Electrical and Building Automation Suppliers’ bids - Monitor the progress of the Suppliers and check their design - Take part in the Factory Acceptance Tests (FAT’s) at Suppliers’ premises - Follow up Electrical & Building Automation construction and commissioning activities at Client’s site
Requisition ID
2022-103079
Multi-Locations
No
Country
Italy
City
Milan
Vacancy Type
Staff / Permanent
Wood is currently recruiting for Piping Designers on a contract basis, who have extensive experience in the Oil & Gas, Petrochemical or similar sector of the industry to provide support to our Client in the execution of projects. Key Accountabilities & Responsibilities: - Keep informed of development in the field of computer and CAD applications as applicable to the Piping Drawing Office - Keep abreast of discipline developments, new technologies and techniques - Carry out technical investigations, produce technical reports as and when required - Advise the HOD Piping Designer of manpower requirements to meet work schedules within the budget allocation - Responsible for the correct interpretation and execution of all piping computer aided draughting functions within the Piping Drawing Office - Prepare document indices for projects to ensure that the scope of work is planned economically and that target dates are known - Submit monthly progress reports and drawing indices to the Project Manager / Project Engineering Manager - Review requests for changes and if outside the scope of work, submit to the relevant Project Manager / Project Engineering Manager an estimate of manhours, costs and any effect to programme under the approval of HOD / Principal Designer - Raise change flags when required, for work considered outside the original scope Submit as approved, to the relevant Project Manager / Project Engineering Manager under the approval of HOD / Principal Designer - Review all information available for each phase of the project and report on delays in receipt of information to the Project Supervisor - Responsible for ensuring engineering and design quality, technical accuracy of drawings, specifications, procedures, etc produced within the Piping Drawing Office - Responsible for the execution of assigned work in accordance with applicable contract procedures and standards, within the manhour and cost budgets and project schedules - Responsible for ensuring adherence to clients and project standards - Responsible for ensuring that contract procedures on safety and quality control are followed - Responsible for adherence to Engineering Procedure for Design Safety and to ensure the adoption of safe attitudes towards piping design and that features affecting the safety and integrity of the projects are reviewed by appropriately authorised engineers from other groups/departments
Requisition ID
2022-103607
Multi-Locations
No
Country
South Africa
City
Midrand
Vacancy Type
Agency / Contract
Wood is currently recruiting for a Senior Piping Engineer with extensive experience in the Oil & Gas, Petrochemical or similar sector of the industry to provide support to our Client in the execution of projects.    Key Accountabilites & Responsibilities: - Deputies for the Chief Piping Engineer when requested. - Responsible for the design and approval of all piping work on assigned projects. - Responsible for preparation and approval of project related standards and job notes. - Ensure that engineering activities on assigned projects are executed within budgeted manhours and approved schedules in compliance with project procedures, standards and specifications and in accordance with procedures and the requirements of the Occupational Health and Safety Act of South Africa. - Review and approve project schedules with the Project Engineer to see that all dates, rates of progress and design periods are realistic. - Prepare and approve project specific standards and job notes. - Prepare pipe material specifications. - Prepare requisition index for special piping items, indicating planned issue date for each requisition. Update and reissue monthly. - Prepare pipe stress index. Update and reissue monthly. - Check piping drawing index for piping work. - Prepare and approve general notes requisitions for piping work. - Design and requisition special piping items. - Prepare support sketches for the drawing office. - Check and approve piping bulk requisitions from MTO. - Prepare piping BOQ. - Review and approve all piping drawings and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard. - Prepare technical bid analysis for special piping items. - Check and approve piping bulk technical evaluations from MTO. - Attend coordination meetings and engineering review meetings with supplier as required. - Review document requirements and issue dates for major equipment with suppliers and assist Procurement Department in compiling a Supplier’s Document Index. - Assist Procurement Department with the expediting of supplier documents. - Review and approve supplier documents for piping and distribute. - Review in conjunction with Procurement Department all claims by supplier for an increase in the engineering scope of work. - Give guidance to client, project engineers, other specialist engineers and inspectors on piping engineering matters. Review piping aspects of package unit supplier’s drawings as requested by the engineer responsible for the equipment. - Ensure that piping engineering operations are complete in accordance with the approved project schedule and within allocated manhours. - Advise the Chief Piping Engineer of any slippages and their causes and proposed corrective action. - Advise the Chief Piping Engineer of any technical problems and unresolved differences with other groups. - Co-ordinate with Procurement Department and ensure certified drawings are available in time to meet the engineering schedules. - Notify the Project Engineer or all deficiencies in the flow of data or other basic information required for execution of work. - Provide progress report information, at the required frequency and with the required content, to the Project Engineer. - Provide information where necessary to estimating the cost of contract changes, Alert the Project Engineer / Project Manager to circumstances considered to be subject to contract change. - Follow up piping construction work on project sites to ensure correct interpretation of designs regarding installation. Resolve any piping problems arising during commissioning. - Keep abreast of development in the piping engineering field. - Suggest ways to improve efficiency, costs and service in the execution of projects. - Assist where necessary in the compilation of operating manuals and mechanical catalogues. - Perform such duties as may reasonably be assigned by the Chief Piping Engineer.
Requisition ID
2022-103608
Multi-Locations
No
Country
South Africa
City
Midrand
Vacancy Type
Agency / Contract
Wood is currently looking to recruit an experienced Senior Rotating Equipment Engineer that has previous experience of working across Feasibility Studies and FEEDs, plus EPC projects. This is an opportunity for you to become a valuable, well-rounded member of an experienced team, with successful candidates taking responsibility for Rotating Equipment issues and deliverables on Wood’s projects at all stages of the design process.   Job Objective: - Review and verification of equipment supplier’s engineering, as well as the testing and commissioning of equipment - Assist with specification and selection of suitable rotating machinery, plus testing and commissioning of suitable equipment - Provide specialist engineering support to global projects in a major engineering contractor organisation. - Preparation of Equipment Technical Specifications, such as Specification and Mechanical Data Sheets, for Enquiry - Technical evaluation / clarification of supplier bids, plus the technical reports to support order placement - Preparation of Equipment Technical Specifications for order and estimates for engineering and design manhours - Review of Process Data Sheets and Supplier documentation for integration within Project design, such as GA / Details / Calculations and Fabrication Procedures - Project technical support – familiarity with risk assessments, design reviews, constructability, HAZOP, etc. - Inspection and construction support as necessary - Technical comparison and evaluation of bids for compliance with requisition and applicable standards - Technical supervision of supplier design and control of supplier interface, plus the co-ordination of interfaces with other engineering disciplines - Technical support for installation and commissioning - Plan and monitor execution of equipment aspects of projects
Requisition ID
2022-103609
Multi-Locations
No
Country
South Africa
City
Midrand
Vacancy Type
Agency / Contract

Search Again

The system cannot access your location for 1 of 2 reasons:
  1. Permission to access your location has been denied. Please reload the page and allow the browser to access your location information.
  2. Your location information has yet to be received. Please wait a moment then hit [Search] again.

Join the Talent Community

Interested in working for Wood? Take the first step today by joining our talent community. By joining the community, your chances of matching to the right role are increased, as our recruiters search the community daily to match open positions with member profiles.

If you can’t see the perfect role advertised online, the talent community is the best way to keep up to date with job opportunities and events relevant to you.

Click here to join today!